Rear Seat Removal

Ballast Install 021
Originally uploaded by gkemp

A big thanks for EKS who I got the detailed instructions from. Here is how it goes down. There are 5 or 6 screws in the carpet panel as you see in the main pick. Once you remove that there are 3 screws to remove. Take out the access cushion and access panel and you can feel to your left and right the bolts that hold the back seat in place. Use a 7/16" wrench to remove the bolts. You have a bolt, lock washer and a bigger washer. Lift the seat out. Now you can take out the fiberglass box that is below. Once that is out you can now remove the floor and see the gas tank and have all the access you want to do the install.